Small wind / Buyer questions
Purchasing and service handoff
Can a crate shock logger establish the acceleration experienced by a wind turbine component?
The short answer
A shock logger measures motion where it is mounted. A sensor on a crate does not directly measure how a component moved inside its supports. Use the event record to identify a shipment and time for review, then compare it with the packaging and equipment acceptance criteria.
Identify the actual instrument and mounting point
Preserve the device serial number, configured range, trigger setting, axis orientation and position on the crate or frame. Record when it was attached and which part of the journey it covered. An event from one mounting location cannot be assigned to another component by changing the label in a spreadsheet.
Request the raw waveform when it exists. A reported peak is less informative if the logger reached its range limit or if the summary omits the duration and direction.
Distinguish the package from the protected assembly
The supports and restraints can change how motion reaches the equipment. A pulse at the crate wall can differ from the response at the shaft or control cabinet. SpotSee’s logger manual identifies separate event characteristics, including range, duration and recorded axes. Those fields describe the monitored location.
A supplier’s allowable limit may apply to a particular location, direction and type of pulse. Check that definition before comparing numbers from the journey with the limit.
Use the result to direct an agreed inspection
Ask the supplier and logistics team to match the event to the package, transport leg and evidence from receipt. Keep the original data and any uncertainty about timestamps or mounting. The equipment reviewer should determine whether further inspection or an approved test is needed. An isolated peak is insufficient to attribute damage or certify condition.
Sources
- SpotSee ShockLog manual: event range, duration and axes
- IMO, ILO and UNECE CTU Code: packing and receiving evidence
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.