Small wind / Buyer questions
Procurement and engineering handover
Can a controller bench report establish wind cabinet performance after integration?
The short answer
A valid controller test can establish the functions actually exercised on the bench. It does not automatically establish behavior with the assembled cabinet’s supply, wiring, other equipment or site interfaces. Determine which requirements belong at each level and which interactions need their own evidence before accepting the integrated assembly.
Identify the tested level and configuration
Request the test article identity, installed options, firmware and the equipment used to supply or simulate its interfaces. NASA’s product verification guidance describes testing at different levels and with different test articles under controlled conditions. A controller that receives a laboratory stimulus can demonstrate its response to that stimulus. That result does not by itself show how the same input is generated, transmitted or acted on in the cabinet.
Check the requirements that span components
Review the approved cabinet drawings and identify functions that depend on more than the controller. A response can be correct in software while the installed indication, external device or power boundary remains unverified. Ask which complete paths the factory test exercised and which are planned for site acceptance. Preserve valid component evidence rather than repeating it automatically. Keep any untested integration requirements open until their agreed verification is complete.
Request a release record that separates the levels
Give the buyer the bench result and cabinet-level evidence with the actual configurations and test boundaries. Ask who owns remaining site verification and how any approved limitations are communicated. If a supplier offers a separately sold controller, request the interface and test records appropriate to that supply scope. Do not treat a component-level pass as a release of equipment or work that was outside the offer.
Sources
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.