Does a flattened removed O-ring prove a specified compression-set failure?

Small wind / Buyer questions

Mechanical inspection and field service

Does a flattened removed O-ring prove a specified compression-set failure?

The short answer

A removed O-ring's flattened shape can be evidence of its service history. Compression set is a measured permanent deformation after a defined compression and recovery process. Parker's handbook explains the test concept and the role of conditions. A photograph or immediate thickness reading from a removed part does not reproduce the specified laboratory test. Keep the field finding while identifying which cause and acceptance questions it can support.

Preserve the removed part's history

Record its position, orientation, original specification, service conditions, time of removal and when any observation was made. Include the groove and mating surfaces. In a hypothetical incident a ring appears flattened after removal, but there is no verified record of its original dimensions or the time allowed for recovery. The observation is useful for comparing locations on the same part without being a controlled material result.

Compare other evidence from the joint

Ask the reviewer to consider assembly compression, temperature, retained fluid, service exposure and the actual leak path. Record whether the ring was cut, swollen or otherwise changed in appearance. These observations can help choose a targeted inspection or supplier review. Keep a reported laboratory result tied to its test specimen, conditions and method, especially if it is used to compare replacement compounds.

Document the disposition of the seal

Write down what the field evidence supports and what remains uncertain. Request applicable material test data if a material acceptance limit is in question. If geometry or assembly is suspected, obtain its separate measurements. The final service record should identify the accepted ring and joint configuration, along with the evidence needed before return to service. This avoids inferring a numerical material property from appearance alone.

Sources

Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.