Why can a fast pulse counter miss events even though the sensor switches correctly?

Small wind / Buyer questions

Electrical diagnostics and service tests

Why can a fast pulse counter miss events even though the sensor switches correctly?

The short answer

A counter's supported rate depends on the input module and its configuration. An input filter can reject short transitions that fall outside its recognition conditions. Rockwell Automation's high-speed counter documentation shows that filter selections apply to inputs. A sensor visible on a slow test may produce valid electrical transitions at operating speed while some pulses are too short for the configured channel. The counter needs evidence at the relevant timing conditions.

Record actual pulse widths and mode

Ask for the source waveform or measured high and low durations at the receiving input over the required speed range. Include duty cycle, output levels, input filter setting and counter mode. A nominal pulse frequency alone can hide a short high or low interval. In a hypothetical installation a narrow pulse works in a slow test but is missed when the mechanism reaches its normal speed.

Compare the physical signal and recorded count

Use the qualified test arrangement to correlate a defined reference count with the channel result. Check the input waveform and its timing, then identify whether the count is produced by a dedicated hardware channel or sampled application logic. They can have different recognition limits. Keep mechanical reference events and the counting configuration on the same record so that a lost transition can be investigated without changing several settings together.

Confirm the accepted operating range

Use the module documentation to identify the supported filter and operating conditions. Ask the reviewer to consider noise rejection as well as pulse recognition when a setting change is proposed. Verify the accepted configuration across the specified operating range and record any limit. A repeatable check of valid counts and unwanted transitions gives the next service team a concrete basis for preserving the setting.

Sources

Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.