Small wind / Buyer questions
Lidar geometry and wind reconstruction
Does faster lidar output remove spatial averaging within a range gate?
The short answer
No. A pulsed lidar can deliver values frequently while each observation still represents a weighted region along its beam. The DNV–Vaisala guide identifies greater spatial averaging and attenuation of velocity variations with longer range gates. Robey and Lundquist explicitly include range-gate weighting in their virtual measurement model. Output cadence does not eliminate that spatial operation.
Identify the actual sampling support
Request the relevant gate configuration and manufacturer description of the weighting or probe volume. Keep those definitions separate from gate spacing, output timestamps and later temporal averaging. Nearby gate centers do not, by themselves, identify independent small measurement volumes. The assessor should state what region contributes to each retained observation under the installed configuration.
Review a hypothetical high-rate campaign change
A monitoring provider increases the saved output rate while retaining the optical configuration. The project then proposes using the new file to characterize much smaller wind structures. The buyer asks what spatial information the original observation actually preserved. More timestamps can describe that output more often without demonstrating that attenuated along-beam variation has been recovered.
Preserve the supported spatial interpretation
Keep the probe definition, acquisition settings and accepted analysis scope with the dataset. Identify whether the required decision concerns mean wind or resolved fluctuations. The dual-scanning guide explicitly leaves turbulence-intensity guidance outside its scope, so a mean-wind configuration is not automatically qualified for that task. Do not transfer one model’s weighting or invent a correction for another instrument.
Sources
- DNV and Vaisala — 2024 dual-scanning lidar WRA guidance, projection and scan definitions
- Robey and Lundquist — stability-dependent lidar reconstruction errors and wind-speed bias
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.