Small wind / Buyer questions
Site measurement and data handoff
Can peak gust values from two wind reports be compared if they use different averaging durations?
The short answer
Peak gusts are comparable only after identifying how each report calculated them. A brief rise can produce a larger peak with a shorter averaging duration and a smaller peak when averaged over a longer duration. Also confirm the observation cycle over which the maximum was selected and whether each report covered the same exposure and period.
Obtain the gust definition from each provider
Ask for the running-average duration, sample cadence and the period used to choose the largest value. WMO's OSCAR variable definition illustrates the difference by describing a gust using a short running average and a maximum over an observation cycle. A vendor's peak column may implement another statistic. The title of the column alone does not establish the definition.
Compare the evidence underlying the reported peaks
A transient rise confined to part of the longer averaging window contributes only part of that average. This is why a higher short-duration gust can coexist with a lower long-duration gust at the same site. Also check sensor response, channel range and the handling of gaps. If a report excluded invalid periods while another included them, matching durations alone does not resolve their coverage difference.
Decide if a common statistic can be recovered
Ask whether the original time series retains sufficient resolution and suitable instrumentation to compute the same gust statistic for both reports. A maximum over one averaging duration cannot generally be converted exactly to a maximum over another from the two reported peaks. Keep the definitions attached to the values and leave an unresolved comparison marked. For a design review, supply the evidence and applicable method to the responsible assessor rather than translating the numbers into a generic gust limit.
Sources
- WMO OSCAR: gust duration and observation cycle definition
- Wind Resource Assessment Handbook: monitoring and data validation
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.