Small wind / Buyer questions
Site measurement and data handoff
Can repeated maximum wind readings mean that a monitoring channel has clipped?
The short answer
Yes. If a measurement channel cannot represent values above a limit, several different wind speeds can appear as one repeated ceiling value. A cluster at the same high reading is a reason to review the channel. It can also arise from rounding or the wind itself, so the repeated number does not establish that clipping occurred.
Locate the first limit in the chain
Request the exact sensor model and measuring range, the input range selected in the logger, its scaling and the export format. A sensing element can operate within its range while a downstream input or conversion caps the reported value. Campbell Scientific's sensor documentation illustrates how the measurement range, output and diagnostic information depend on the instrument. A platform's generic good flag may only establish that a value arrived.
Compare values before and after processing
Look for repeated ceilings in the raw channel, intermediate engineering values and final report. Ask whether a matching observation from an independently qualified instrument exists during those intervals. A higher raw value followed by a capped export supports an export or conversion problem. If every retained stage is capped, the true magnitude may be unrecoverable. Preserve the highest supported observation and distinguish uncertain peaks from confirmed measurements.
Accept only the use the record supports
A truncated high-speed tail can affect resource bins, energy estimates and a review of the observed conditions. Ask the assessor to quantify the affected intervals and show the sensitivity to their treatment. An adjusted plot cannot establish the original peaks without supporting evidence. For a turbine enquiry, deliver the range and flag history with the accepted record. Do not use a monitoring channel outside its qualified range as evidence of a site's design extreme.
Sources
- Campbell Scientific sensor example: wind speed measurement range and output
- Campbell Scientific sonic sensor example: observations and diagnostic status
- Wind Resource Assessment Handbook: monitoring and data validation
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.