Small wind / Buyer questions
Electrical retrofit interfaces
Does uninterrupted source transfer avoid a utility parallel review in a wind hybrid retrofit?
The short answer
An uninterrupted transfer can involve a brief overlap between sources. If the arrangement temporarily parallels the utility and a local source, the project needs to establish the applicable permission and protection conditions. A short overlap and a steady zero-export setting answer different questions.
Identify the transition mode by contact state
Ask the switchgear supplier for the proposed contact sequence and permitted source combinations. Eaton describes closed transition as connecting the incoming source before the outgoing source is disconnected. In an open transition the existing source is disconnected before connection to the next source. These methods can have different service effects and different utility review requirements.
Compare the actual configuration with the specification. A product family capable of several transition modes does not establish which one will be used.
Resolve who can approve any overlap
Locate the utility interface on the proposed single-line diagram and identify whether wind, an inverter or another local source can be connected during the overlap. Ask the project integrator to state the assumed parallel interval, the applicable utility conditions and the response if the outgoing source remains connected. The accepted arrangement may differ by site and utility.
Record the cases that procurement must cover
Request evidence for the normal transfer, restoration transfer and cases where a source does not meet the transfer conditions. The equipment quote should name who provides the contact-state evidence, protection review and any required utility acceptance. If overlap is outside the approved site design, ask the designer to assess permitted alternatives and their effect on critical loads. Leave actual switching and verification to the authorized project team.
Sources
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.