Small wind / Buyer questions
Generator and converter interfaces
Does an SSI label make a yaw encoder replacement compatible?
The short answer
The SSI designation identifies an interface family, while the receiver still needs the encoder's actual data format and timing. Encoder Products Company lists Gray or binary output, optional parity and error bits, and a specified clock range for an example absolute encoder. Confirm those details for the ordered model and the receiving yaw controller before treating a replacement as interchangeable.
Match the complete transmitted word
Request the single-turn and multi-turn bit allocations, output code, total frame length and positions of any status or parity bits. Record the supply, electrical interface and connector pinout as separate requirements. The receiver must know which bits represent position and which report another condition. A matching number of position bits alone can leave the remaining frame interpretation unresolved.
Review a plausible but incorrect position
In a hypothetical replacement, the new encoder sends Gray-coded position while the retained receiver interprets the same bits as ordinary binary. Data continue arriving, yet the reported angle can be wrong. Another variant can add a status bit that shifts the receiver's extraction of position. Ask for the complete configured word and the approved position comparison for the actual sensor and receiver pair.
Retain the receiver configuration with the spare code
Keep the encoder order code, data sheet revision, clock setting and receiving hardware configuration in the spare-parts record. Ask the controls supplier how it validates communication and position over the required movement range, including the interpretation of status bits. Record the established angle reference and permitted recovery behavior separately. A successful SSI transfer supports the signal-interface assessment, while the machine designer must still confirm that the decoded position has the reference and meaning required by the yaw functions.
Sources
- Encoder Products Company A36SB data sheet, SSI codes, timing and optional status bits
- Encoder Products Company description of the SSI clocked serial transaction
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.