Are temperature-compensated conductivity results comparable without their correction model and reference temperature?

Small wind / Buyer questions

Water-quality measurements and process evidence

Are temperature-compensated conductivity results comparable without their correction model and reference temperature?

The short answer

Retain both the correction model and reference temperature. METTLER TOLEDO describes linear, non-linear and other conductivity temperature treatments. Its guide explains that a linear temperature coefficient depends on concentration and temperature. The reviewer needs the actual correction basis to determine whether the submitted results support the intended water comparison.

Identify the measured and corrected values

Request each meter’s sample temperature, original conductivity, correction mode, applicable coefficient or model and reference temperature. Keep the relevant manufacturer definition with the report. Ask the laboratory which treatment is appropriate for the actual sample. A compensated label leaves these settings to be established from the saved configuration and the accepted measurement method.

Review different reference settings

In a hypothetical comparison, one report refers conductivity to 20 °C and another to 25 °C, while both display the same conductivity unit. The buyer asks the reviewer to reconcile the reference conditions and correction models before accepting a change in water quality. Original readings and sample temperatures remain available for any supported comparison under the laboratory’s approved method.

Keep the accepted comparison reproducible

Retain the correction configuration, sample applicability and reviewer’s conclusion with the water records. Identify which reporting periods use each basis and preserve any approved recalculation separately from the original values. The process team determines whether the final series meets its acceptance objective. A later meter or software change should carry the same configuration evidence so the comparison can be reproduced.

Sources

Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.