Small wind / Buyer questions
Motor starting and auxiliary loads
Can a larger replacement softstarter detect a small auxiliary motor's running current?
The short answer
A larger current rating does not establish every operating condition. Schneider Electric lists insufficient motor current relative to starter rating among possible phase-fault causes for ATS46 and ATS48 operation without a shorting contactor. That is a model-specific diagnostic possibility, not a diagnosis of a particular fault. Ask the supplier whether the proposed starter and actual motor satisfy the applicable lower-current conditions.
Identify the motor and the active current path
Record the starter model and rating, motor nameplate, expected running-current range and whether the relevant state uses a shorting contactor. Include the actual configuration and firmware where applicable. A spare selected for a future larger motor may need a separate assessment for the smaller motor installed today. Keep both motor duties distinct in the substitution request.
Review a low-current replacement case
In a hypothetical remote-site package, the replacement starter has ample maximum-current capacity but operates a lightly loaded auxiliary motor. A phase-related alarm appears during the acceptance campaign. The buyer asks the qualified supplier to review the recorded current, operating state and event information against the model documentation. Other documented causes remain part of the specialist's assessment; the alarm label alone does not prove a missing supply phase.
Retain the compatibility conclusion
Keep the supplier's disposition for the actual starter–motor combination, applicable restrictions and approved verification record with the handover. Identify which present operating states were assessed and which future motor remains outside that evidence. Any proposed protection or configuration change requires the responsible team's review. The acceptance record should demonstrate the supported combination rather than treat oversizing as proof that the starter will recognize every smaller load.
Sources
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.