Can an injector marked PoE replace a passive injector on a wind monitoring link?

Small wind / Buyer questions

Electrical diagnostics and service tests

Can an injector marked PoE replace a passive injector on a wind monitoring link?

The short answer

An Ethernet connector and a PoE label are insufficient to establish injector compatibility. A passive injector may apply a fixed voltage without standards-based powered-device detection or negotiation. MikroTik and Ubiquiti document passive arrangements with equipment-specific voltage, pairs and polarity. Compare the replacement source with the exact input specification of the endpoint. A physically compatible connection can still present the wrong supply conditions.

Match the two electrical interfaces

Record the old and proposed injector models and the powered device model. Compare the documented detection behavior, supplied voltage, energized pairs, polarity and supported power at the endpoint. In a hypothetical service call a spare injector fits the same connectors, but its voltage is outside the camera's published input range. A shared connector and the same data speed do not resolve that mismatch.

Keep power and data compatibility separate

Check the as-built drawing to establish which connection carries data alone and which also carries power. Include any intermediate protection, splitters or switches identified in the approved layout. A link test between two unpowered data interfaces does not demonstrate that applying a passive supply through the installed path is suitable. Record any uncertainty about the exact revision or power mode.

Record the supported replacement

Ask the equipment owner or vendor for a matching combination and retain the exact source and powered-device data sheets. Have the responsible installer verify the approved arrangement before energizing it. Keep a spare-part record by supported electrical interface as well as connector and location. The wind monitoring plan can then distinguish a documented replacement from an unverified part with a similar label.

Sources

Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.