Small wind / Buyer questions
Connector interfaces and data interpretation
Does a connector's mating thread establish its panel mounting thread?
The short answer
No. These thread descriptions can refer to different joints. Binder defines mounting thread at the device-side connection and describes locking as the system joining the pin and socket components. A connector-family or mating-thread description therefore does not supply the complete detail needed for attachment to a panel or equipment housing.
Locate each joint on the drawing
For a proposed panel connector, identify the feature fastening the connector to the equipment and the feature engaging its cable counterpart. Request the actual mounting drawing for the offered variant. Keep any front or rear mounting designation visible. The dimensions at the cable-mating interface should not be copied into a panel-opening requirement simply because both details occur on the same component.
Check a replacement against both interfaces
Suppose a hypothetical replacement has the required mating designation, while the supplier's drawing shows a different device-side mounting detail. Its cable-side identity does not resolve whether it attaches to the retained housing. The buyer needs the equipment integrator's assessment of the actual mounting drawing. An unchanged cable counterpart can coexist with an unresolved panel attachment, so the two review outcomes should remain separately stated.
Order the complete mounting variant
Record the exact connector reference and the device-side mounting requirements alongside the matching cable half. Include the applicable drawing revision rather than ordering by the visible mating designation alone. This review concerns which joint a thread describes; it does not prescribe a new panel cutout, thread adaptation, tightening value or sealing method. No mounting geometry is inferred for MARSTON equipment from a generic connector family name.
Sources
Examples are illustrative. Confirm product-specific performance, compatibility and supply scope in the applicable documents.