Serie ad asse verticale
2 kW Vertical Axis Wind Turbine
This 2 kW vertical axis wind turbine has a 2.6 m rotor diameter, 2.6 m rotor height and 4 aluminium alloy blades. Its permanent-magnet direct-drive generator uses copper windings and NdFeB magnets.
- Potenza nominale
- 2 kW
- Diametro del rotore
- 2.6 m
- Altezza del rotore
- 2.6 m
- Numero di pale
- 4
01 / Specifiche tecniche
2 kW vertical axis wind turbine specifications
L’altezza del rotore riguarda il gruppo rotante, non la torre o l’altezza totale installata. La potenza nominale è specificata a 12 m/s; la produzione annua dipende dal vento e dalla configurazione elettrica.
| Model | 2 kW |
|---|---|
| Rated power | 2 kW |
| Rotor diameter | 2.6 m |
| Rotor height | 2.6 m |
| Swept area | 6.76 m² |
| Blade quantity | 4 |
| Blade material | Aluminium alloy |
| Generator | Three-phase AC permanent-magnet brushless generator |
| Drive arrangement | Direct drive |
| Winding material | Copper |
| Permanent magnets | NdFeB |
| Rated rotational speed | 270 rpm |
| Start-up wind speed | 2 m/s (rotor start-up) |
| Rated wind speed | 12 m/s |
| Speed limiting | Generator electromagnetic damping |
| Main unit weight | 180 kg |
Rotor and generator construction
The vertical-axis rotor has 4 aluminium alloy blades connected to the central assembly by support members. The rotor dimensions are 2.6 m in diameter and 2.6 m in height. The generator is a three-phase AC brushless permanent-magnet unit with a direct-drive arrangement, copper windings and NdFeB rotor magnets.
The stated 2 m/s start-up value describes the rotor beginning to rotate. It is not a guaranteed electrical cut-in speed or a promise of useful output at that wind speed. Rated power is specified at 12 m/s; site energy production depends on the wind conditions and selected electrical configuration.
Electrical configuration and supply scope
Generator voltage and the associated controller and converter are selected for the project. The turbine assembly and the complete electrical system have separate supply boundaries. Identify the intended grid connection or load before selecting the power-conversion equipment.
Installation and project planning
Plan the tower connection, structural support, foundation, cable route, earthing and maintenance access for the site. The 2.6 m rotor height is the height of the rotating assembly, not the tower height or total installed height. Confirm the installation drawings and the exact equipment package in the quotation.
Domande frequenti
Questions before ordering
Is the controller included?
The quotation specifies whether the order covers the turbine assembly only or includes control and power-conversion equipment.
Can rated power predict annual generation?
No. An energy estimate requires the wind-speed distribution at the installation height, an applicable power curve and system-loss assumptions. Share measured wind data for a project review.
Configurazione
Request a technical quotation
Send your project location, wind measurements and measurement height, required voltage and frequency, intended grid connection or load, quantity and tower requirements. MARSTON POWER will identify the turbine assembly, control equipment, power conversion and installation interfaces included in the quotation.